Round sapphires at a glance
| Outline | Circular, usually with a brilliant facet pattern |
|---|---|
| Approximate size | About 6 mm across at 1 ct, 7.5 mm at 2 ct, 8.5 mm at 3 ct |
| Yield from rough | Lower than an oval or cushion cut from the same crystal |
| Strengths | Even brilliance, no bow tie, the easiest shape to pair |
| Watch for | Windowing in shallow stones, extra depth below the girdle |
| Common settings | Studs, solitaires, halos, accent and side stones |
What is listed right now
Right now the catalog holds 19 round sapphires, from 0.43 to 7.08 ct, and 18 are available to reserve. The most common colors are blue, yellow, teal. By the suppliers' own statements, 16 are heated and 3 unheated. 5 listings include a video.
By color: Blue (11), Yellow (4), Teal (2), Peach (1), Green (1).
What makes rounds scarcer
A sapphire crystal is rarely as wide as it is long, so turning it into a circle means grinding away the ends. Yield for any faceted corundum is modest, and a round usually costs noticeably more weight than an oval cut from the same piece of rough. With the material sold by the carat, most cutters choose the outline that saves weight unless the crystal is already short and stubby.
That is why a fine round usually carries a higher price per carat than an oval of the same color and clarity, and why calibrated rounds above a couple of carats are hard to collect in matching sets. Small rounds, by contrast, are cut in large numbers for accent and pavé work.
Brilliance, symmetry and no bow tie
Because every side is the same distance from the center, a well cut round returns light evenly and shows no bow tie. That makes it the most forgiving outline for strongly colored material, which can look dark in elongated cuts. Rounds also sparkle well in small sizes, which is why studs and halos use them.
The trade off is that symmetry exposes poor cutting. An off center culet, a wavy girdle or a lopsided table is easy to spot. Check the top view photo for an evenly spaced star pattern and a table centered in the outline.
Diameter, depth and how big a round looks
Sapphire weighs about 13 percent more than diamond for the same volume, so rounds face up smaller per carat. A typical 1 ct stone measures close to 6 mm across, a 2 ct stone about 7.5 mm and a 3 ct stone about 8.5 mm. Deep native cuts can weigh the same with a diameter half a millimeter or more smaller.
Compare the listed diameter with the weight. If a 1.20 ct round is only 5.6 mm wide, much of the weight sits under the girdle and the gem will need a taller setting. Shallow stones have the opposite problem and may show a window through the center.
Rounds for matched pairs and studs
Earrings and three stone designs need stones that match in diameter, color and tone. Circles are the easiest outline to pair because there is no ratio to match, only size and color. When pairing, look for stones from the same supplier and compare them side by side on video under the same light.
For studs, a diameter difference of a tenth of a millimeter is invisible once set, but a difference in tone is not. Reserve a few candidates at once and release the ones that do not match.
Color, treatment and documentation
The rounds on this page cover the colors suppliers have listed, from blue to yellow, pink and teal. Each listing states the treatment and marks it lab documented only when a laboratory report is attached.
If you plan to sell a round as unheated, buy one with a report. Heat treatment cannot be confirmed or ruled out without laboratory testing, and customers buying a center stone increasingly ask to see the paperwork.
Native rounds and precision cut rounds
Sri Lankan workshops cut rounds two ways. Native rounds are shaped by eye on a hand driven wheel to save weight, so the outline may be slightly out of round and the pavilion deeper than ideal. Precision rounds are cut on machines to set angles, with an even outline and a calibrated diameter that drops straight into a ready made mounting.
Both have a place. Native stones often cost less per carat and can show lovely color, while precision stones save setting time and suit production lines. The listing photos and measurements usually make the difference clear: a precision round lists two diameters within a few hundredths of each other.
Questions buyers ask
How many round sapphires are available?
19 loose rounds are listed now, ranging from 0.43 to 7.08 ct. Use the filters for color, treatment and carat level.
What size is a 1 carat round sapphire?
Close to 6 mm in diameter for a well proportioned stone. A 1 ct round diamond is about 6.5 mm, so the sapphire looks a little smaller for the same weight.
Why do round sapphires cost more per carat?
Cutting a circle from an elongated crystal loses more weight than cutting an oval or cushion, so each remaining carat costs more. Larger matched rounds are also less common.
Are rounds good for engagement rings?
Sapphire is 9 on the Mohs scale, hard enough for daily wear, and a round center shows even color without a bow tie. Choose a setting that protects the girdle, such as four or six prongs or a bezel.
What diameter is a 2 carat round sapphire?
About 7.5 mm for a stone of normal depth. Native cuts of the same weight can measure closer to 7 mm because more of the weight sits below the girdle.
