Seylora

Pear shaped sapphires

A pear shaped sapphire is a teardrop cut: rounded at one end and tapering to a point at the other. The stones listed here come from reviewed suppliers in Sri Lanka, each with its weight, length and width, color and stated treatment.

4 listed · 0.66 to 1.03 ctTrade access
Filters (2)
Carat weight
Custom range
Reset

No stones match these filters yet.

Try removing a filter, or apply for trade access to be notified as inventory is approved.

Trade prices are shown to approved retail accounts. Sign in or apply.

Pear shaped sapphires at a glance

OutlineTeardrop, one rounded end and one point
Typical ratioLength to width of about 1.40 to 1.70
Facet styleBrilliant, sometimes with a mixed pavilion
Watch forBow tie, uneven shoulders, a thin or chipped point
ProtectThe point, with a V prong or a bezel
Common usesPendants, drop earrings, solitaire and halo rings

What is listed right now

Right now the catalog holds 4 pear shaped sapphires, from 0.66 to 1.03 ct, and 4 are available to reserve. The most common colors are blue, purple. By the suppliers' own statements, 3 are heated and 1 unheated.

By color: Blue (2), Purple (2).

Why the teardrop works in sapphire

Pear shapes often come from rough that is wider at one end, a common habit in tapering corundum crystals. Following that outline lets the cutter keep weight that a round or oval would lose. The point also gives the eye a direction, which is why pears are a favorite for pendants and drops.

Fewer pears are cut than ovals or cushions, so they appear in smaller numbers in any catalog. Matching a pair for earrings takes patience; reserve candidates together and compare them on the same day.

Ratio, shoulders and symmetry

A ratio near 1.50 gives the familiar teardrop. Lower ratios look stubby and higher ones look narrow and elegant. Beyond the ratio, look at the shoulders, the curves either side of the point. They should be even and full; flat or uneven shoulders make a stone look lopsided once set.

Draw an imaginary line from the point through the center of the rounded end. A well cut pear is a mirror image on each side of that line. Check the top view photo carefully, since small asymmetry is easy to miss in a list view.

Bow tie and the dark point

Like ovals and marquises, pears can show a bow tie across the widest part. Strongly colored stones can also go dark toward the tip, where the pavilion is steep. A video that shows the gem moving is the best way to judge whether either effect is mild or distracting.

Lighter blues, yellows and pinks usually handle the shape better than very dark material. If a dark teardrop is what a design needs, look for one with a shallower pavilion near the point.

Setting and protecting the point

The tip is the most vulnerable part of the stone. A V shaped prong or a bezel around it protects the point during setting and wear. Ask your setter to check that it is not thin or already nicked before setting; the listing photos often show it clearly.

For pendants and drop earrings the point usually faces down. In rings it traditionally points toward the fingertip, though designers turn it either way.

Color, treatment and reports

Pear shaped stones are listed in the colors suppliers have in stock, and each one states its treatment. A treatment value marked lab documented means a laboratory report is attached to the listing.

For unheated stones, or blues of strong color above two carats, ask for a report from a recognized laboratory before the gem goes into a finished piece.

Sizes and how big a pear looks

Length makes a teardrop look generous for its weight. A well proportioned 1 ct stone measures roughly 8 by 5.5 mm, and a 2 ct stone roughly 10 by 6.5 mm, though depth and ratio move both numbers. That extra length is why the shape is popular when a design needs presence without a heavier stone.

Check that the listed length and width match the weight. A pear that is short for its carats carries weight in a deep belly, which can also darken the point.

Matching pears for earrings

Earring pairs need more than equal weight. The two stones should share a ratio, a similar shoulder curve and the same tone, and ideally they are mirror images, so the facets reflect in balance when the stones hang side by side.

Suppliers sometimes cut pairs from the same crystal, which makes matching far easier. When two listings come from one supplier with similar measurements and color, reserve both and compare them on video together before you commit.

Questions buyers ask

How many pear shaped sapphires are listed?

4 loose teardrop stones are in the catalog now, between 0.66 and 1.03 ct. New stones appear as suppliers list them.

Which way should a pear sapphire point in a ring?

Traditionally toward the fingertip, which visually lengthens the finger. Many modern designs turn it the other way or set it east to west. Either way, protect the point with a V prong or a bezel.

Are pear cut sapphires good for earrings?

They are among the most popular drop earring shapes. The hard part is matching two stones in size, ratio and color, so reserve several candidates and compare them together.

Why does the tip of a pear sapphire look dark?

Steep pavilion facets near the point can let light escape, so strongly colored stones may look darker there. A lighter color or a shallower pavilion at the tip reduces the effect.

How big is a 1 carat pear shaped sapphire?

Roughly 8 by 5.5 mm face up for a stone of normal depth. Its length makes it look larger than a round of the same weight.