Seylora

Heart shaped sapphires

A heart shaped sapphire is a brilliant cut with two rounded lobes, a cleft between them and a point at the base. The stones on this page come from reviewed suppliers in Sri Lanka, each listed with weight, measurements, color and stated treatment.

1 listed · 0.62 to 0.62 ctTrade access
Filters (1)
Carat weight
Custom range
Reset

Trade prices are shown to approved retail accounts. Sign in or apply.

Heart shaped sapphires at a glance

OutlineTwo lobes, a central cleft and a point
Typical ratioLength to width of about 0.90 to 1.10
Facet styleBrilliant
Size adviceSmall hearts can look round once set; larger stones show the outline clearly
Watch forUneven lobes, a shallow cleft, a thin point
Common usesPendants, rings, earrings, gifts

What is listed right now

Right now the catalog holds 1 heart shaped sapphire of 0.62 ct, and 1 is available to reserve. Its color is blue. By the suppliers' own statements, 1 is heated and 0 unheated.

By color: Blue (1).

A shape that depends on symmetry

A heart is a pear with a cleft, and like a pear it needs balance. The two lobes should match in size and curve, the cleft should be clear, and the point should sit on the center line. Small differences that would pass in an oval are obvious here.

Cutting one also costs weight and skill, so these stones are cut in small numbers. Expect only a few in any catalog at one time.

Size and how the outline reads

In very small sizes the cleft and point blur into a rounded outline once prongs cover the edges. Larger stones show the shape clearly, which is why hearts are often chosen at a carat or more for pendants and rings.

A ratio near 1.00 looks classic. Longer hearts look slimmer, wider ones look broad and soft.

Color and light

The brilliant pavilion can show a faint bow tie, and color tends to gather toward the point. Medium tones of pink, blue and padparadscha show the shape best, while very dark stones can lose the outline.

Check the listing video for an even face. A stone that looks dark on one lobe is not cut evenly.

Setting and care

Protect the point with a V prong and hold each lobe with a prong or a bezel. Pendants usually hang point down.

As with every listing, the treatment is shown on the stone and marked lab documented when a laboratory report is attached.

Size guide

A heart of about 1 ct measures roughly 6 to 6.5 mm wide and long, and a 2 ct stone about 7.5 mm. Because the outline spreads weight across two lobes, a heart looks broad for its weight, closer to a cushion than a pear.

The cleft takes some depth out of the top of the stone, so hearts are often cut a little deeper in the belly to keep weight. Compare the listed measurements with the carat figure before reserving.

Designing with hearts

Pendants are the natural home for this shape, usually hung point down from a bail at the cleft. Hearts also appear as ring centers, in halos that trace the outline, and in two stone rings beside a round or pear. As small accents they work in clusters and charm bracelets.

A thin bezel follows the outline closely and protects both the point and the lobes, which makes it a good choice for pieces that will be worn often.

Matching hearts for earrings

Stud earrings need two stones of similar size, ratio, cleft depth and color. Hearts are cut in small numbers, so pairs are hard to assemble from separate parcels. When one supplier lists two similar stones, reserve both and compare them together before deciding.

Small differences in the depth of the cleft are more visible than small differences in weight, so judge pairs on the face-up photos first.

Proportions to check on a listing

Look at four things in the top view photo: the two lobes should be equal in width and height, the cleft should be crisp and centered, the point should be sharp but not thin, and the sides between lobe and point should curve evenly without flat spots.

Then compare length and width. A ratio between about 0.95 and 1.05 gives a balanced heart; outside that range the stone starts to look either stretched or squat once set.

Questions buyers ask

How many heart shaped sapphires are listed?

1 loose heart shaped stones are listed now, from 0.62 to 0.62 ct.

What makes a well cut heart?

Even lobes, a clear cleft, a point on the center line and a ratio near 1.00. Color should be even across the face without a dark lobe.

How big is a 1 carat heart shaped sapphire?

Roughly 6 to 6.5 mm wide and long for a stone of normal depth. It faces up broader than a 1 ct pear because the weight is spread across two lobes.

Which colors suit a heart shaped stone?

Medium tones of pink, blue, purple and padparadscha show the outline best. Very dark material can hide the cleft, and very pale stones can look washed out in the lobes.

Should a heart point up or down in a pendant?

Usually down, with the bail at the cleft. Some designers hang it sideways or point up for a modern look, but point down is the familiar orientation.

Are heart shaped sapphires rare?

They are cut in small numbers because the shape costs weight and needs precise cutting, so only a few are usually available at a time.